Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 99 / 788

■
You can modify an existing alias with a different local address pool name.
■
When a local address pool is deleted, all aliases with the matching pool name
are also deleted.
■
Example
host1(config)# ip local alias groupB pool-name addrpool_10
■
Use the no version to remove the alias name.
■
See ip local alias
ip local pool
■
Use to map an address pool name to a range of local addresses.
■
You can create a pool with no address ranges configured for it.
■
A name may contain up to 16 characters.
■
Example
host1(config)# ip local pool addrpool_10 192.168.56.10 192.168.56.15
■
Use the no version to remove the local pool (all ranges), or the specified range.
■
See ip local pool
ip local pool snmpTrap
■
Use to enable SNMP pool utilization traps.
■
Example
host 1(config)# ip local pool addr_test snmpTrap
■
Use the no version to disable SNMP pool utilization traps.
■
See ip local pool snmpTrap
ip local pool warning
■
Use to set SNMP utilization warning threshold values.
■
Example
host1(config)# ip local pool addr_test warning 90 80
■
Use the no version to reset the attributes to their default values; high threshold
85, abated threshold 75.
■
See ip local pool warning
ip local shared-pool
■
Use to create a local shared address pool and to specify the DHCP address pool
that provides the addresses.
■
You can reference a DHCP address pool that has not yet been configured.
Configuring Local Address Servers
■ 59
Chapter 1: Configuring Remote Access