Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 763 / 788

host1# show service-management subscriber-session 20
User Name: CLIENT50@ISP.COM, Interface: ip192.168.100.33
Id: 20
Owner/Id: CLI
Non-volatile: True
State: Active
ServiceSessions:
Name mutex Owner State Operation
------------------- ----- ----- ------------------- ---------
internet(5000,8000) 12 CLI Config ApplySuccess Activate
Name Non-volatile
------------------ ------------
internet(5000,8000) True
Meaning
Table 164 on page 723 lists the show service-management subscriber-session
command output fields.
Table 164: show service-management subscriber-session Output Fields
Field Description Field Name
Name of the subscriber or name of the service session Name
Type and IP address of the subscriber’s interface Interface
ID number of the subscriber session Id
Index number of the mutex group to which the
service session belongs mutex
Method used to activate the subscriber session (CLI,
AAA) and ID number generated by the owner
(Acct-Session-ID for AAA) Owner/Id
Status of the subscriber session (active or inactive),
or status of the service session State
Indicates whether the service session is stored in
NVS; RADIUS-based service sessions are not stored
in NVS Non-volatile
Number of service sessions currently active for this
subscriber Service Sessions
Last operation that Service Manager performed Operation
Name of the service, with parameter values in
parentheses Service
Indicates whether the last operation was activate
(True) or deactivate (False) Activate
Type of statistics collected; none, time, or
volume-time Statistics Type
Whether statistics have been successfully collected;
True or False Statistics Complete
Monitoring Active Subscriber Sessions with Service Manager
■ 723
Chapter 28: Monitoring Service Manager