manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Get familiar with Juniper JUNOSE 11.0.X MULTICAST ROUTING with our Configuration Manual. This comprehensive manual covers all aspects of multicast routing configuration. Download it for free from manualshive.com and enhance your networking skills with the latest information on multicast routing protocols and configurations.

Share
Download
background image

Managing the L2TP Destination Lockout Process .........................................360

Modifying the Lockout Procedure .........................................................360
Verifying That a Locked-Out Destination Is Available ............................362
Configuring a Lockout Timeout .............................................................362
Unlocking a Destination that is Currently Locked Out ...........................362
Starting an Immediate Lockout Test .....................................................363

Managing Address Changes Received from Remote Endpoints ...................363
Configuring LAC Tunnel Selection Parameters .............................................364

Configuring the Failover Between Preference Levels Method ................364
Configuring the Failover Within a Preference Level Method ..................365
Configuring the Maximum Sessions per Tunnel ....................................366
Configuring the Weighted Load Balancing Method ................................366

Chapter 13

Configuring an L2TP LNS

369

LNS Configuration Prerequisites ..................................................................369
Configuring an LNS .....................................................................................370
Creating an L2TP Destination Profile ...........................................................372
Creating an L2TP Host Profile ......................................................................373
Configuring the Maximum Number of LNS Sessions ...................................374
Configuring the RADIUS Connect-Info Attribute on the LNS ........................374
Overriding LNS Out-of-Resource Result Codes 4 and 5 ................................375

Overriding the Result Codes .................................................................375
Displaying the Current Override Setting ................................................376

Selecting Tunnel-Service Modules for LNS Sessions Using MLPPP ...............376

Assigning Bundled Group Identifiers .....................................................377
Overriding All Endpoint Discriminators ................................................378

Enabling Tunnel Switching ..........................................................................378
Creating Persistent Tunnels .........................................................................379
Testing Tunnel Configuration ......................................................................379
Managing L2TP Destinations, Tunnels, and Sessions ...................................379
Configuring Disconnect Cause Information .................................................380

Generating the Disconnect Cause AVP Globally .....................................380
Generating the Disconnect Cause AVP with a Host Profile ....................381
Enabling RADIUS Accounting for Disconnect Cause ..............................381
Displaying Disconnect Cause Statistics .................................................381

Configuring the Receive Window Size .........................................................382

Configuring the Default Receive Window Size ......................................382
Configuring the Receive Window Size on the LAC ................................383
Configuring the Receive Window Size on the LNS .................................384

Configuring Peer Resynchronization ...........................................................385

Configuring Peer Resynchronization for L2TP Host Profiles and AAA

Domain Map Tunnels .....................................................................386

Configuring the Global L2TP Peer Resynchronization Method ...............387
Using RADIUS to Configure Peer Resynchronization .............................388

Configuring L2TP Tunnel Switch Profiles .....................................................388

Applying the L2TP Tunnel Switch Profile ..............................................388
Configuration Guidelines .......................................................................389
Configuring L2TP AVPs for Relay ..........................................................389

xviii

■

Table of Contents

JUNOSe 11.0.x Broadband Access Configuration Guide

Summary of Contents for JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.0.X MULTICAST ROUTING

Panasonic Avccam AG-AF100A Series Manual preview
Avccam AG-AF100A Series
Brand: Panasonic Pages: 19
Xerox FreeFlow Manual preview
FreeFlow
Brand: Xerox Pages: 18
FARONICS DEEP FREEZE ENTERPRISE - PATCH MANAGEMENT... Manual preview
DEEP FREEZE ENTERPRISE - PATCH MANAGEMENT...
Brand: FARONICS Pages: 23
NeatWorks TV708LL/A - NeatWorks For Mac Using Manual preview
TV708LL/A - NeatWorks For Mac
Brand: NeatWorks Pages: 33
Drobo How-To Manual preview
How-To
Brand: Drobo Pages: 6
Autodesk AUTODESK ROBOT STRUCTURAL ANALYSIS PROFESSIONAL Brochure preview
AUTODESK ROBOT STRUCTURAL ANALYSIS PROFESSIONAL
Brand: Autodesk Pages: 6
Better Edge technology 5.2.7.0 User Manual preview
5.2.7.0
Brand: Better Edge technology Pages: 121
Sony D-NF610 - Portable Cd Player Specifications preview
D-NF610 - Portable Cd Player
Brand: Sony Pages: 1
Sony D-NF420 - Portable Cd Player Specifications preview
D-NF420 - Portable Cd Player
Brand: Sony Pages: 2
Sony D-NE718CK - Portable Cd Player Specifications preview
D-NE718CK - Portable Cd Player
Brand: Sony Pages: 2
Sony D-NE520 - Atrac Cd Walkman Portable Player Specifications preview
D-NE520 - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony CPF-IX001 - Wireless PC-Linked Audio System Installation Manual preview
CPF-IX001 - Wireless PC-Linked Audio System
Brand: Sony Pages: 2
Sony D-NE20 - Atrac Cd Walkman Installation & Operating Manual preview
D-NE20 - Atrac Cd Walkman
Brand: Sony Pages: 20
Sony D-NE718CK - Portable Cd Player Service Manual preview
D-NE718CK - Portable Cd Player
Brand: Sony Pages: 36
Sony D-NF420 - Portable Cd Player Service Manual preview
D-NF420 - Portable Cd Player
Brand: Sony Pages: 38
Sony D-NF610 - Portable Cd Player Operating Instructions Manual preview
D-NF610 - Portable Cd Player
Brand: Sony Pages: 40
Sony D-NE329SP - Atrac Cd Walkman Portable Player Operating Instructions Manual preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 39
Sony Clie Clie Version 2.0 User Manual preview
Clie Clie Version 2.0
Brand: Sony Pages: 57

Brands by name

Popular brands

Load more brands