manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Get familiar with Juniper JUNOSE 11.0.X MULTICAST ROUTING with our Configuration Manual. This comprehensive manual covers all aspects of multicast routing configuration. Download it for free from manualshive.com and enhance your networking skills with the latest information on multicast routing protocols and configurations.

Share
Download
background image

Part 3

Managing L2TP

Chapter 11

L2TP Overview

329

L2TP Overview ............................................................................................329
L2TP Terminology .......................................................................................330
Implementing L2TP .....................................................................................331

Sequence of Events on the LAC ............................................................331
Sequence of Events on the LNS .............................................................332

Packet Fragmentation .................................................................................333
L2TP Platform Considerations .....................................................................334
L2TP Module Requirements ........................................................................334

ERX7xx Models, ERX14xx Models, and the ERX310 Router .................334
E120 Router and E320 Router ..............................................................335

Sessions and Tunnels Supported .................................................................335
L2TP References .........................................................................................336

Chapter 12

Configuring an L2TP LAC

337

LAC Configuration Prerequisites ..................................................................337
Modifying L2TP LAC Default Settings for Managing Destinations, Tunnels,

and Sessions .........................................................................................338

Generating UDP Checksums in Packets to L2TP Peers .................................339
Specifying a Destruct Timeout for L2TP Tunnels and Sessions ....................339
Preventing Creation of New Destinations, Tunnels, and Sessions ................340

Preventing Creation of New Destinations, Tunnels, and Sessions on the

Router ............................................................................................340

Preventing Creation of New Tunnels and Sessions at a Destination ......341
Preventing Creation of New Sessions for a Tunnel ................................341
Specifying a Drain Timeout for a Disconnected Tunnel .........................341

Shutting Down Destinations, Tunnels, and Sessions ....................................342

Closing Existing and Preventing New Destinations, Tunnels, and Sessions

on the Router .................................................................................342

Closing Existing and Preventing New Tunnels and Sessions for a

Destination .....................................................................................342

Closing Existing and Preventing New Sessions in a Specific Tunnel ......342
Closing a Specific Session .....................................................................343

Specifying the Number of Retransmission Attempts ....................................343
Configuring Calling Number AVP Formats ...................................................343

Calling Number AVP 22 Configuration Tasks ........................................347
Configuring the Fallback Format ...........................................................348
Disabling the Calling Number AVP ........................................................351

Mapping a User Domain Name to an L2TP Tunnel Overview ......................352
Mapping User Domain Names to L2TP Tunnels from Domain Map Tunnel

Mode ....................................................................................................353

Mapping User Domain Names to L2TP Tunnels from Tunnel Group Tunnel

Mode ....................................................................................................357

Configuring the RX Speed on the LAC .........................................................359

Table of Contents

■

xvii

Table of Contents

Summary of Contents for JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.0.X MULTICAST ROUTING

NEC AccuSync LCD52V White Paper preview
AccuSync LCD52V
Brand: NEC Pages: 5
MACROMEDIA COLFUSION MX 7 - INSTALLING AND USING COLDFUSION... Using Manual preview
COLFUSION MX 7 - INSTALLING AND USING COLDFUSION...
Brand: MACROMEDIA Pages: 72
VeriFone GemStall User Manual preview
GemStall
Brand: VeriFone Pages: 25
MACROMEDIA FLEX-CREATING ADVANCED COMPONENTS Manual preview
FLEX-CREATING ADVANCED COMPONENTS
Brand: MACROMEDIA Pages: 24
IBM E02D1LL-E - Rational Rose Enterprise Installation Manual preview
E02D1LL-E - Rational Rose Enterprise
Brand: IBM Pages: 46
McAfee VIRUSSCAN ENTERPRISE Datasheet preview
VIRUSSCAN ENTERPRISE
Brand: McAfee Pages: 2
Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual preview
ETERNUS VSS Hardware Provider 2.1
Brand: Fujitsu Pages: 134
Fujitsu ATLAS V14 User Manual preview
ATLAS V14
Brand: Fujitsu Pages: 302
Fujitsu PFU Rack2-Filer User Manual preview
PFU Rack2-Filer
Brand: Fujitsu Pages: 463
Fujitsu Eternus web GUI User Manual preview
Eternus web GUI
Brand: Fujitsu Pages: 635
Fujitsu ETERNUS User Manual preview
ETERNUS
Brand: Fujitsu Pages: 64
TomTom App for Android Reference Manual preview
App for Android
Brand: TomTom Pages: 58
Lenovo Active Protection System Manual preview
Active Protection System
Brand: Lenovo Pages: 10
Lenovo Aptiva Hardware Maintenance Manual preview
Aptiva
Brand: Lenovo Pages: 464
Lenovo ACTIVATION Error Code List preview
ACTIVATION
Brand: Lenovo Pages: 3
Samsung SyncMaster S23A950D User Manual preview
SyncMaster S23A950D
Brand: Samsung Pages: 90
Samsung SyncMaster T23A750 E-Manual preview
SyncMaster T23A750
Brand: Samsung Pages: 292
National Instruments LabVIEW User Manual preview
LabVIEW
Brand: National Instruments Pages: 63

Brands by name

Popular brands

Load more brands