Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 84 / 788

aaa local username
■
Use to configure a user entry in the specified local user database and to enter
Local User Configuration mode.
■
The username must be unique within a particular database; however, the same
username can be used in different databases.
■
Use the database name default to configure the username in the default local
user database.
NOTE: The router supports usernames up to 64 characters long; however, PAP and
CHAP support is limited to 31-character usernames.
■
Example
host1(config)# aaa local username cksmith database westLocal40
■
Use the no version to delete the user entry from the specified local user database.
Use the database name default to delete the user entry from the default local
user database.
■
See aaa local username
ip address
■
Use to specify the IP address parameter for a user entry in the local user database.
The address is negotiated with the subscriber after the subscriber is authenticated.
■
Example
host1(config-local-user)# ip-address 192.168.42.6
■
Use the no version to delete the IP address parameter from the user entry in the
local user database.
■
See ip address
ip address-pool
■
Use to specify the IP address pool parameter for a user entry in the local user
database. The address pool is used to assign an IP address to the subscriber; the
address is negotiated with the subscriber after the subscriber is authenticated.
■
Example
host1(config-local-user)# ip-address-pool svPool2
■
Use the no version to delete the IP address pool parameter from the user entry
in the local user database.
■
See ip address-pool
operational-virtual-router
44 ■
Configuring Local Authentication Servers
JUNOSe 11.0.x Broadband Access Configuration Guide