manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Get familiar with Juniper JUNOSE 11.0.X MULTICAST ROUTING with our Configuration Manual. This comprehensive manual covers all aspects of multicast routing configuration. Download it for free from manualshive.com and enhance your networking skills with the latest information on multicast routing protocols and configurations.

Share
Download
background image

Part 2

Managing RADIUS and

Chapter 3

Configuring RADIUS Attributes

165

RADIUS Overview .......................................................................................165

RADIUS Services ...................................................................................166
RADIUS Attributes ................................................................................166

RADIUS Platform Considerations ................................................................166
RADIUS References .....................................................................................167
Subscriber AAA Access Messages ................................................................167

Supported RADIUS IETF Attributes .......................................................168
Supported Juniper Networks VSAs ........................................................170

Subscriber AAA Accounting Messages .........................................................175

Supported RADIUS IETF Attributes .......................................................175
Supported Juniper Networks VSAs ........................................................178
Tunnel Accounting Messages ................................................................181

DSL Forum VSAs in AAA Access and Accounting Messages .........................182
CLI AAA Messages .......................................................................................184
CLI Commands Used to Modify RADIUS Attributes .....................................184

RADIUS IETF Attributes ........................................................................185

[4] NAS-IP-Address .........................................................................185
[5] NAS-Port ...................................................................................186
[8] Framed-IP-Address ....................................................................189
[9] Framed-Ip-Netmask ..................................................................189
[13] Framed-Compression ..............................................................190
[25] Class .......................................................................................190
[30] Called-Station-Id ......................................................................191
[31] Calling-Station-Id .....................................................................191
[32] NAS-Identifier .........................................................................196
[41] Acct-Delay-Time ......................................................................198
[44] Acct-Session-Id ........................................................................199
[45] Acct-Authentic .........................................................................200
[49] Acct-Terminate-Cause .............................................................200
[50] Acct-Multi-Session-Id ...............................................................201
[51] Acct-Link-Count .......................................................................201
[52] Acct-Input-Gigawords ..............................................................202
[53] Output-Gigawords ...................................................................202
[55] Event-Timestamp ....................................................................202
[61] NAS-Port-Type ........................................................................203
[64] Tunnel-Type ............................................................................204
[65] Tunnel-Medium-Type ..............................................................205
[66] Tunnel-Client-Endpoint ...........................................................205
[67] Tunnel-Server-Endpoint ..........................................................205
[68] Acct-Tunnel-Connection ..........................................................206
[77] Connect-Info ...........................................................................206
[82] Tunnel-Assignment-Id .............................................................207
[83] Tunnel-Preference ...................................................................208
[87] NAS-Port-Id .............................................................................208
[90] Tunnel-Client-Auth-Id ..............................................................209
[91] Tunnel-Server-Auth-Id .............................................................210

Table of Contents

■

xiii

Table of Contents

Summary of Contents for JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.0.X MULTICAST ROUTING

Altigen AltiServ HPBX Administration Manual preview
AltiServ HPBX
Brand: Altigen Pages: 19
Intrinsyc Telephony Modem Simulator Brochure preview
Telephony Modem Simulator
Brand: Intrinsyc Pages: 2
Elgato EyeTV Hybrid Hardware Reference Manual preview
EyeTV Hybrid
Brand: Elgato Pages: 5
DeLorme Topo North America User Manual preview
Topo North America
Brand: DeLorme Pages: 369
AVG ANTI-VIRUS 2011 - REV 2011.07 User Manual preview
ANTI-VIRUS 2011 - REV 2011.07
Brand: AVG Pages: 210
AVG ANTI-VIRUS 2011 - REV 2011.06 User Manual preview
ANTI-VIRUS 2011 - REV 2011.06
Brand: AVG Pages: 210
Zing Magic Checkers User Manual preview
Checkers
Brand: Zing Magic Pages: 10
Adaptec CDP-00276-01-A User Manual preview
CDP-00276-01-A
Brand: Adaptec Pages: 45
GameShark GAME CUBE Instruction Manual preview
GAME CUBE
Brand: GameShark Pages: 16
Nikon View DX Reference Manual preview
View DX
Brand: Nikon Pages: 38
Universal Audio UAD User Manual preview
UAD
Brand: Universal Audio Pages: 585
Mackie DIGITAL XBUS - SOFTWARE Installation Manual preview
DIGITAL XBUS - SOFTWARE
Brand: Mackie Pages: 8
MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual preview
FIREWORKS 8-USING FIREWORKS
Brand: MACROMEDIA Pages: 472
MACROMEDIA FLASH MX 2004-ACTIONSCRIPT LANGUAGE Reference preview
FLASH MX 2004-ACTIONSCRIPT LANGUAGE
Brand: MACROMEDIA Pages: 1104
ICP GDTMON Manual preview
GDTMON
Brand: ICP Pages: 60
Quantum Scalar i2000 User Manual preview
Scalar i2000
Brand: Quantum Pages: 120
Wavecom GR64 Application Note preview
GR64
Brand: Wavecom Pages: 26
LG ZetaDisplay Installation preview
ZetaDisplay
Brand: LG Pages: 2

Brands by name

Popular brands

Load more brands