Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 613 / 788

Table 131: show ip dhcp-local limits Output Fields (continued)
Field Description Field Name
Number of leases available for each Ethernet
subnet Ethernet Limit
Number of leases available to the specified
interface or subinterface; indicates the
configured value for the interface type unless a
specific lease value is configured for the
particular interface Limit
Number of active leases on the interface Count
Number of lease requests denied during the
current denial period; this number is reset to
zero (and the denial period restarted) when the
number of active leases no longer exceeds the
configured limit Denied
Total number of lease requests denied on the
interface since the interface became active Total Denied
Related Topics
■
show ip dhcp-local limits
Monitoring Static IP Address and MAC Address Pairs Supplied by DHCP Local Server
Purpose
Display the static IP address/MAC address pairs that the DHCP local server supplies
in standalone mode.
Action
To display information about static IP address/MAC address pairs:
host1# show ip dhcp-local reserved
Dhcp Reserved Addresses
-----------------------
Pool Address Hardware
---------- ------------ -----------------------------------------------
cablemodem 10.44.44.100 12-34-12-34-12-34-00-00-00-00-00-00-00-00-00-00
cablemodem 10.44.44.101 22-33-22-33-22-33-00-00-00-00-00-00-00-00-00-00
Meaning
Table 132 on page 573 lists the show ip dhcp-local reserved command output fields.
Table 132: show ip dhcp-local reserved Output Fields
Field Description Field Name
Name of pool in which the address is reserved Pool
IP address that is reserved Address
Monitoring Static IP Address and MAC Address Pairs Supplied by DHCP Local Server
■ 573
Chapter 22: Monitoring and Troubleshooting DHCP