Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 709 / 788

Table 149: Sample Acct-Start Message for a Service Session (continued)
Sample Value RADIUS Attribute
forwardAll ingress-policy-name (vsa)
forwardAll egress-policy-name (vsa)
#ERX-01-00-06#E12#0 calling-station-id
0 acct-input-gigawords
4032 acct-input-octets
0 acct-output-gigawords
2163 acct-output-octets
0 acct-input-gigapackets (vsa)
7 acct-input-packets
0 acct-output-gigapackets (vsa)
7 acct-output-packets
15 nas-port-type
3221225472 nas-port
FastEthernet 12/0 nas-port-id
1 acct-authentic
0 acct-session-time
tiered(1280000, 5120000) acct-service-session
1200 service-interim-acct-interva
l
aaa service accounting interval
■
Use to specify the default interval between service accounting updates. Service
manager uses the default interval when no value is specified in the
Service-Interim-Acct-Interval attribute (Juniper VSA 26-140).
■
This command and the aaa user accounting interval command replace the aaa
accounting interval command, which is deprecated and might be removed in
a future release.
■
The default interval is applied on a virtual router basis—this setting is used for
services associated with all users who attach to the corresponding virtual router.
■
Specify the service accounting interval, in the range 10–1440 minutes. The
default setting is 0, which disables the feature.
Configuring RADIUS Accounting for Service Manager
■ 669
Chapter 27: Configuring Service Manager