Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 157 / 788

Table 13: show aaa domain-map Output Fields (continued)
Field Description Field Name
Source address of the tunnel Tunnel Source
L2TP Tunnel Type
Type of medium for the tunnel; only IPv4 is supported Tunnel Medium
Password for the tunnel Tunnel Password
ID of the tunnel Tunnel Id
Host name that the LAC sends to the LNS when
communicating to the LNS about the tunnel Tunnel Client Name
Host name expected from the peer (the LNS) when
during tunnel startup Tunnel Server Name
Preference level for the tunnel Tunnel Preference
Maximum number of sessions allowed on a tunnel Tunnel Max Sessions
L2TP receive window size (RWS) for a tunnel on the
LAC; displays either the configured value or the
default behavior, which is indicated by system
chooses Tunnel RWS
Name of the virtual router to map to the user domain
name Tunnel Virtual Router
L2TP peer resynchronization method Tunnel Failover Resync
Name of the L2TP tunnel switch profile Tunnel Switch Profile
Method that the router uses to calculate the transmit
connect speed of the subscriber’s access interface:
static layer2, dynamic layer2, qos, actual, not set Tunnel Tx Speed Method
Related Topics
■
show aaa domain-map
Monitoring Tunnel Subscriber Authentication
Purpose
Verify configuration of tunnel subscriber authentication. When authentication is
enabled, the output indicates this configuration. When authentication is disabled,
the output presents no information about the configuration.
Action
To display tunnel subscriber authentication configuration:
Monitoring Tunnel Subscriber Authentication
■ 117
Chapter 2: Monitoring and Troubleshooting Remote Access