Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 314 / 788

Table 53: Default AAA Mappings (continued)
RADIUS Acct-Terminate-Cause AAA Shutdown or Deny Reason
Description Code
user error 17 deny invalid tunnel configuration
user error 17 deny limit exceeded
nas request 10 deny mixed user types
user error 17 deny no access challenge support
user error 17 deny no address allocation resources
nas request 10 deny no resources
user error 17 deny redirected authentication failure
user error 17 deny server not available
user error 17 deny server request timeout
nas request 10 deny terminating user
user error 17 deny unknown subscriber
user error 17 deny user termination
nas request 10 shutdown address lease expiration
admin reset 6 shutdown administrative reset
L2TP Terminate Reasons
Table 54 on page 274 lists the default L2TP terminate mappings. The table indicates
the supported L2TP terminate reasons and the RADIUS Acct-Terminate-Cause
attributes they are mapped to by default.
Table 54: Default L2TP Mappings
RADIUS Acct-Terminate-Cause L2TP Terminate Reason
Description Code
port error 8 session access interface down
admin reset 6 session admin close
admin reset 6 session admin drain
nas request 10 session call down
service unavailable 15 session call failed
274 ■
L2TP Terminate Reasons
JUNOSe 11.0.x Broadband Access Configuration Guide