Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 179 / 788

shared_poolA 253 dhcp_pool_25
shared_poolB 83 dhcp_pool_25
shared_poolC 99 dhcp_pool_17
Meaning
Table 26 on page 139 lists the show ip local shared-pool command output fields.
Table 26: show ip local shared-pool Output Fields
Field Description Field Name
Name of the shared local address pool Shared Pool
Number of addresses allocated In Use
Name of the DHCP address pool Dhcp Pool
Related Topics
■
show ip local shared-pool
Monitoring the Routing Table
Purpose
Display the current state of the routing table, including routes not used for forwarding.
An Access-P entry in the Type column of the output indicates routes that are
downloaded by the RADIUS route-download server.
Action
To display information in the routing table:
host1# show ip route
Protocol/Route type codes:
I1- ISIS level 1, I2- ISIS level2,
I- route type intra, IA- route type inter, E- route type external,
i- metric type internal, e- metric type external,
P- periodic download, O- OSPF, E1- external type 1, E2- external type2,
N1- NSSA external type1, N2- NSSA external type2
L- MPLS label, V- VRF, *- via indirect next-hop
Prefix/Length Type Next Hop Dst/Met Interface
------------------ --------- --------------- ---------- -----------------
0.0.0.0/0 Static 10.13.10.1 1/0 FastEthernet6/0/0
192.168.10.0/23 Connect 10.13.10.187 0/0 FastEthernet6/0/0
192.168.21.21/32 Access-P 255.255.255.255 254/2 null0
192.168.22.22/32 Access-P 255.255.255.255 254/2 null0
192.168.23.23/32 Access-P 255.255.255.255 254/2 null0
192.168.24.24/32 Access-P 255.255.255.255 254/2 null0
Meaning
Refer to the description of the show ip route command in JUNOSe IP, IPv6, and IGP
Configuration Guide for additional information about the show ip route command.
Monitoring the Routing Table
■ 139
Chapter 2: Monitoring and Troubleshooting Remote Access