Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 66 / 788

■
radius —RADIUS accounting for the specified subscribers.
■
none —No accounting is done for the specified subscribers.
■
radius none —Multiple types of accounting; used in the order specified. For
example, radius none specifies that RADIUS accounting is initially used;
however, if RADIUS servers are not available, no accounting is done.
■
Example
host1(config)# aaa accounting ppp default radius
■
Use the no version to set the accounting protocol to the default, radius .
■
See aaa accounting default
aaa accounting duplication
■
Use to enable AAA duplicate accounting on a virtual router. Specifies that duplicate
accounting records be sent to the accounting server on another virtual router.
■
Example
host1(config)# aaa accounting duplication routerBoston
■
Use the no version to disable the feature.
■
See aaa accounting duplication
aaa accounting immediate-update
■
Use to send an accounting update to the accounting server immediately on
receipt of a response for an Acct-Start message.
■
Use the enable keyword to enable immediate updates. Use the disable keyword
to disable immediate updates. Immediate updates are disabled by default.
■
Example
host1(config)# aaa accounting immediate-update enable
■
Use the no version to restore the default condition, disabling immediate updates.
■
See aaa accounting immediate-update
aaa accounting interval
26 ■
Configuring RADIUS Authentication and Accounting Servers
JUNOSe 11.0.x Broadband Access Configuration Guide