Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 296 / 788

Table 49: RADIUS IETF Attributes Supported by JUNOSe Software (continued)
Description Attribute Name
Attribute
Number
Indicates how long in seconds that the user has received service Acct-Session-Time [46]
■
Indicates how many packets have been received from the port during the
time this service has been provided to a framed user
■
IP subscriber manager—Statistics are reported
■
PPP—Statistics are counted according to the rules of the generic interface
MIB
Acct-Input-Packets [47]
■
Indicates how many packets have been sent to the port in the course of
delivering this service to a framed user
■
IP subscriber manager—Statistics are reported
■
PPP—Statistics are counted according to the rules of the generic interface
MIB
Acct-Output-Packets [48]
Contains the reason the service (a PPP session) was terminated. The service can
be terminated for the following reasons:
■
User Request (1)—User initiated the disconnect (log out)
■
Idle Timeout (4)—Idle timer has expired
■
Session Timeout (5)—Client reached the maximum continuous time allowed
on the service or session
■
Admin Reset (6)—System administrator terminated the session
■
Port Error (8)—PVC failed; no hardware or no interface
■
NAS Error (9)—Negotiation failures, connection failures, or address lease
expiration
■
NAS Request (10)—PPP challenge timeout, PPP request timeout, tunnel
establishment failure, PPP bundle failure, IP address lease expiration, PPP
keep-alive failure, Tunnel disconnect, or an unaccounted-for error
Acct-Terminate-Cause [49]
■
String constructed from the Acct-Session-ID of the first PPP link established
for the Multilink PPP bundle and the internal Multilink PPP bundle ID.
■
This string is the hexidecimal ASCII characters for two 4-octet unsigned
integers. Example: 0a34331200001249.
Acct-Multi-Session-Id [50]
A value that increments with each link that joins the MLPPP bundle. This attribute
does not indicate the number of active links. For more details, see RFC
2866—RADIUS Accounting (June 2000). Acct-Link-Count [51]
■
Indicates how many times the Acct-Input-Octets counter has wrapped around
2^32 during the time this service has been provided, and can be present in
Accounting-Request records only where the Acct-Status-Type is set to Stop or
Interim-Update
■
IP subscriber manager—Statistics are reported
■
PPP—Statistics are counted according to the rules of the generic interface
MIB
Acct-Input-Gigawords [52]
256 ■
RADIUS IETF Attributes
JUNOSe 11.0.x Broadband Access Configuration Guide