Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 396 / 788

19.
(Optional) Disable the generation of authentication challenges by the local tunnel,
so that the tunnel does not send a challenge during negotiation. However, the
tunnel does accept and respond to challenges it receives from the peer.
host1(config)# l2tp disable challenge
20.
Verify the L2TP tunnel configuration.
host1(config)# show aaa domain-map
Domain: westford.com; router-name: default; ipv6-router-name: default
Tunnel
Tunnel Tunnel Tunnel Tunnel Tunnel Tunnel Tunnel Client
Tag Peer Source Type Medium Password Id Name
------ ------------ ----------- ------ ------ --------- ------ ------
3 192.168.2.13 192.168.3.3 l2tp ipv4 temporary acton host4
Tunnel Tunnel Tunnel
Tunnel Server Tunnel Max Virtual
Tag Name Preference Sessions Tunnel RWS Router
------ ------ ---------- -------- -------------- -------
3 boston 5 0 system chooses vr2
host1# show aaa tunnel-parameters
Tunnel password is 3&92k%b#q4
Tunnel client-name is <NULL>
Tunnel nas-port-method is none
Tunnel nas-port ignore disabled
Tunnel nas-port-type ignore disabled
Tunnel assignmentId format is assignmentId
Tunnel calling number format is descriptive
Related Topics
■
Mapping User Domain Names to L2TP Tunnels from Tunnel Group Tunnel Mode
on page 357
■
aaa domain-map
■
aaa tunnel assignment-id-format
■
aaa tunnel client-name
■
aaa tunnel ignore
■
aaa tunnel password
■
address
■
client-name command
■
identification command
■
l2tp disable challenge
■
l2tp ignore-receive-data-sequencing
■
medium ipv4 command
■
password command
■
preference command
■
router-name
356 ■
Mapping User Domain Names to L2TP Tunnels from Domain Map Tunnel Mode
JUNOSe 11.0.x Broadband Access Configuration Guide