Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 86 / 788

■
Use to add a secret to a user entry in the local user database. The secret is used
to authenticate a subscriber, and is encrypted by means of the Message Digest
5 (MD5) encryption algorithm.
NOTE: CHAP authentication requires that passwords and secrets be stored in clear
text or use two-way encryption. Two-way encryption is not supported for the secret
command. Therefore, use the password command if you want to enable encryption
for subscribers that use CHAP authentication.
■
The new secret replaces any current password or secret.
■
Specify one of the following encryption algorithms, followed by the secret:
■
0—An unencrypted secret; this is the default
■
5—An MD5-encrypted secret
■
Example
host1(config-local-user)# secret 5 Q3&t9REwk45jxSM#fj$z
■
Use the no version to delete the secret or password from the user entry in the
local user database.
■
See secret
user-name
■
Use to configure a user entry and optional password or secret in the default local
user database. This command creates the database if it does not already exist.
■
Optionally, specify a password or secret that is assigned to the user in the default
local user database, or specify that no password is required for the particular
username.
■
Specify one of the following encryption algorithms, followed by the password:
■
0—An unencrypted password; this is the default
■
8—A two-way encrypted password
■
Specify one of the following encryption algorithms, followed by the secret:
■
0—An unencrypted secret; this is the default
■
5—An MD5-encrypted secret
■
Use the nopassword keyword to remove the password or secret
NOTE: CHAP authentication requires that passwords and secrets be stored in clear
text or use two-way encryption. Two-way encryption is not supported for the secret
command. Therefore, use the password command if you want to enable encryption
for subscribers that use CHAP authentication.
■
Example
46 ■
Configuring Local Authentication Servers
JUNOSe 11.0.x Broadband Access Configuration Guide