Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 197 / 788

Table 32: show subscribers Output Fields (continued)
Field Description Field Name
Maximum value of the Total Subscriber field during
the time the router has been active, chassis-wide Peak Subscribers
Number of subscribers; the sum of the Ppp and Ip
fields Subscribers
Number of PPPoA and PPPoE users, combined Ppp
Number of DHCP and IP subscriber manager users,
combined Ip
Number of users tunneled to an LNS Tnl
Total number of users per virtual router; the sum of
the Ppp, Ip, and Tnl fields Total
Domain name used by the subscriber Domain Name
A unique identifier for each ICR partition on a chassis.
Note that this ID different from the partition name,
which is configured using the
ip vrrp vrid
icr-partition partitionName command.
ICR-Partition (location-id)
Number of subscribers Count
Number of slot in the chassis Slot
Related Topics
■
show subscribers
Monitoring Application Terminate Reason Mappings
Purpose
Display information about the mappings for application terminate reasons.
Action
To display the current terminate reasons that are mapped to a specific
Acct-Terminate-Cause-Code:
This example uses the radius keyword to display all current terminate reasons
mapped to RADIUS Acct-Terminate-Cause codes. The output lists all PPP mappings,
followed by L2TP mappings, and then AAA mappings.
host1(config)# run show terminate-code radius
Radius
Apps Terminate Reason Description Code
--------- -------------------------- -------------------------- ------
ppp authenticate-authenticator authenticate authenticator 17
-timeout timeout
ppp authenticate-challenge-tim authenticate challenge tim 10
Monitoring Application Terminate Reason Mappings
■ 157
Chapter 2: Monitoring and Troubleshooting Remote Access