Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 196 / 788

Interface Count
-------------------- -----
ATM 3/2.1 1
ETHERNET 5/2.1 2
LAG lag1.100 1
Total Subscribers: 4 (chassis-wide total)
Peak Subscribers: 8 (chassis-wide total)
To display the number of subscribers by slot:
host1# show subscribers summary slot
Slot Count
-------- -----
3 1
5 4
Total Subscribers : 5 (chassis-wide total)
Peak Subscribers : 8 (chassis-wide total)
To display the number of subscribers by ICR partition:
host1# show subscribers summary icr-partition
ICR-Partition (location-id) Count
-------------------------------------------- --------
3/0.1.4 5
3/0.2.5 5
Total Subscribers: 10 (chassis-wide total)
Peak Subscribers: 15 (chassis-wide total)
Meaning
Table 32 on page 156 lists the show subscribers command output fields.
Table 32: show subscribers Output Fields
Field Description Field Name
Name of the subscriber User Name
Type of subscriber: atm, ip, ipsec, ppp, tnl (tunnel),
tst (test) Type
IP or IPv6 address and source of the address: l2tp,
local, dhcp, radius, user. For local, dhcp, radius, and
user endpoints, the address is that of the user. When
the endpoint is l2tp, the address is that of the LNS. Addr | Endpt
Name of the virtual router context Virtual Router
Interface specifier over which the subscriber is
connected Interface
Date, in YY/MM/DD format, and time the subscriber
logged in Login Time
User circuit ID value specified by PPPoE Circuit Id
User remote ID value specified by PPPoE Remote Id
Number of active subscribers, chassis-wide Total Subscribers
156 ■
Monitoring Subscriber Information
JUNOSe 11.0.x Broadband Access Configuration Guide