Juniper JUNOSE 11.0.X MULTICAST ROUTING, Configuration Manual

Page: 527 / 788

host1(config-if)# exit
host1(config)# interface fastEthernet 2/0
host1(config-if)# ip unnumbered loopback 0
2.
Configure the parameters to enable the router to forward authentication requests
to the RADIUS server.
host1(config)# radius authentication server 10.10.1.2
host1(config)# udp-port 1645
host1(config)# key radius
3.
Specify the authentication method.
host1(config)# aaa authentication ppp default radius
Or
host1(config)# aaa authentication ppp default none
4.
Enable the DHCP local server.
host1(config)# service dhcp-local
5.
Specify the IP addresses that are in use, so that the DHCP local server cannot
assign these addresses.
host1(config)# ip dhcp-local excluded-address 10.10.1.1
host1(config)# ip dhcp-local excluded-address 10.10.1.2
6.
Configure the DHCP local server to provide IP addresses to subscribers of ISP
Boston.
host1(config) ip dhcp-local pool ispBoston
host1(config-dhcp-local)# network 10.10.2.0 255.255.255.0
host1(config-dhcp-local)# domain-name ispBoston
host1(config-dhcp-local)# default-router 10.10.2.1
host1(config-dhcp-local)# lease 0 0 10
host1(config-dhcp-local)# ip dhcp-local limit atm 5
7.
Configure the SRC client.
host1(config)# sscc enable
host1(config)# sscc retryTimer 200
host1(config)# sscc primary address 10.10.1.2 port 3288
Configuring the Router to Work with the SRC Software
■ 487
Chapter 19: Configuring DHCP Local Server