INVT GD300-004G-4, Operation Manual

Page: 108 / 312

Goodrive300 inverters Function codes
107
Functi
on
code
Name Detailed instruction of parameters
Default
value
Modif
y
The function is illustrated as below:
Setting range of P08.25:P08.26~65535
Setting range of P08.26:0~P08.25
P08.27
Set running
time
Pre-set running time of the inverter. When the
accumulative running time achieves the set time,
the multi-function digital output terminals will output
the signal of “running time arrival”.
Setting range:0~65535m
0m
○
P08.28
Fault reset
times
0
○
P08.29
Interval
time of
automatic
fault reset
Fault reset times: set the automatic fault reset
times. If the reset time exceeds this set value, the
inverter will stop to wait maintenance.
Interval time of automatic fault reset: the interval
between the time when the fault occurs and the
time when the reset action occurs.
Setting range of P08.28:0~10
Setting range of P08.29:0.1~3600.0s
1.0s
○
P08.30
Frequency
decreasing
ratio of the
dropping
control
The output frequency of the inverter changes as
the load. And it is mainly used to balance the power
when several inverters drive one load.
Setting range:0.00~50.00Hz
0.00Hz
○
P08.31
Motor
shifting
Goodrive300 supports the shift between two
motors. This function is used to select the shifting
channel.
LED ones: shifting channel
0: terminal shifting; digital terminal is 35
1: MODBUS communication shifting
0
◎