INVT GD300-004G-4, Operation Manual

Page: 7 / 312

Goodrive300 inverters Safety precautions
6
Symbols Name Instruction Abbreviation
Do not
Electrostatic
discharge
Damage to the PCBA board may
occur if not follow the relative
requirements
Hot sides
Hot sides
Sides of the device may become
hot. Do not touch.
Note
Note
Physical hurt may occur if not follow
the relative requirements
Note
1.4 Safety guidelines
 Only qualified electricians are allowed to operate on the inverter.
 Do not carry out any wiring and inspection or changing components when the
power supply is applied. Ensure all input power supply is disconnected
before wiring and checking and always wait for at least the time designated
on the inverter or until the DC bus voltage is less than 36V. Below is the table
of the waiting time:
Inverter module Minimum waiting time
380V 1.5kW-110kW 5 minutes
380V 132 kW -315 kW 15 minutes
380V above 350 kW 25 minutes
660V 22kW-132kW 5 minutes
660V 160kW-350kW 15 minutes
660V 400kW-630kW 25 minutes

Do not refit the inverter unauthorizedly; otherwise fire, electric shock or other
injury may occur.
 The base of the radiator may become hot during running. Do not touch to
avoid hurt.

The electrical parts and components inside the inverter are electrostatic. Take
measurements to avoid electrostatic discharge during relevent operation.
1.4.1 Delivery and installation

Please install the inverter on fire-retardant material and keep the inverter
away from combustible materials.