INVT GD300-004G-4, Operation Manual

Page: 110 / 312

Goodrive300 inverters Function codes
109
Functi
on
code
Name Detailed instruction of parameters
Default
value
Modif
y
arrival
detection
value
or negative detection range of the set frequency,
the multi-function digital output terminal will output
the signal of “frequency arrival”, see the diagram
below for detailed information:
The setting range:0.00Hz~P00.03(the Max.
frequency)
P08.37
Energy
braking
enable
This parameter is used to control the internal
braking pipe inside the inverter.
0:Disable
1:Enable
Note: Only applied to internal braking pipe.
0
○
220V
voltage:
380.0V
380V
voltage:
700.0V
P08.38
Threshold
voltage
After setting the original bus voltage to brake the
energy, adjust the voltage appropriately to brake
the load. The factory changes with the voltage
level.
The setting range:200.0~2000.0V
660V
voltage:
1120.0V
○
P08.39
Cooling fan
running
mode
0: Normal mode
1:The fan keeps running after power on
0
○