INVT GD300-004G-4, Operation Manual

Page: 90 / 312

Goodrive300 inverters Function codes
89
Functi
on
code
Name Detailed instruction of parameters
Default
value
Modif
y
10:Upper limit frequency arrival
11:Lower limit frequency arrival
12:Ready for operation
13:Pre-magnetizing
14:Overload pre-alarm
15: Underload pre-alarm
16:Completion of simple PLC stage
17:Completion of simple PLC cycle
18:Setting count value arrival
19:Defined count value arrival
20:External fault valid
21:Length arrival
22:Running time arrival
23:MODBUS communication virtual terminals
output
24:PROFIBUS communication virtual terminals
output
25: Ethernet communication virtual terminals
output
26~30: Reserved
P06.05
Polarity of
output
terminals
The function code is used to set the pole of the
output terminal.
When the current bit is set to 0, input terminal is
positive.
When the current bit is set to 1, input terminal is
negative.
BIT0 BIT1 BIT2 BIT3
Y HDO RO1 RO2
Setting range:00~0F
00
○
P06.06
Y switch-on
delay time
The function code defines the corresponding delay
time of the electrical level change during the
0.000s
○