INVT GD300-004G-4, Operation Manual

Page: 83 / 312

Goodrive300 inverters Function codes
82
Functi
on
code
Name Detailed instruction of parameters
Default
value
Modif
y
valid
2:PROFIBUS communication virtual terminals are
valid
3: Ethernet communication virtual terminals are
valid
4: Communication virtual terminals are valid
P05.13
Terminals
control
running
mode
Set the operation mode of the terminals control
0:2-wire control 1, comply the enable with the
direction. This mode is widely used. It determines
the rotation direction by the defined FWD and REV
terminals command.
1:2-wire control 2
；
Separate the enable from the
direction. FWD defined by this mode is the
enabling ones. The direction depends on the state
of the defined REV.
2:3-wire control 1; Sin is the enabling terminal on
this mode, and the running command is caused by
FWD and the direction is controlled by REV. Sin
0
◎