imagistics ipc1-im8130, Operator'S Manual

Page: 32 / 214

16 ipc1-im8130 Operator’s Guide
3 Select
Remove
to uninstall all previously installed components from
the client workstation.
4 Follow the setup wizard to remove files from the workstation.
5 Click
Finish
to exit the setup program.
You may need to reboot the workstation before all of the components,
for example the program items from the Windows Start menu, are
removed.
Installing Windows Printer Drivers
Adding Printers in a Windows Environment
Install the drivers as part of the InstallShield client software setup
process. Later, as required, add, re-install, or update drivers in the
following ways:
„
Run the Setup program.
Use the Client Setup Maintenance program to install selected drivers
if you have the original or an updated ipc1-im8130 Client CD-ROM or
can access it on a network directory. For instructions, refer to
Installing from the CD-ROM on page 10.
„
Download the drivers from the controller.
Drivers are automatically downloaded by pointing to the shared
printer on the controller in a Microsoft peer to peer environment.
Similarly, if the controller has been set up as an NDPS printer, the
drivers configured for the selected printer agent are automatically
downloaded.
Caution ! This method may install outdated drivers if the controller
has not been updated with the most recent driver software. For
instructions, refer to Download the Drivers from the Controller on
page 18.
„
Install the drivers from a disk or a network location.
Use the Add Printer wizard to install driver software by locating the
driver
setup.inf
file either on the ipc1-im8130 Client CD-ROM or in a
primed network directory. This is the method you must use if printing
to a Novell, IPP, or LPD queue. You must also configure a Microsoft
port for the printer.
For procedures, refer to
Configuring Microsoft Printer Ports on
page 26.
„
Install drivers from Printer Utility