imagistics ipc1-im8130, Operator'S Manual

Page: 114 / 214

98 ipc1-im8130 Operator’s Guide
4 Enter the five-digit Private DIN in the field. You can enter less than
five digits, but the controller expects the preceding digit, which in this
case would be zero (0).
5 Click
Print
. The document is spooled to the controller for printing.
6 Release the job from the control panel. See Releasing Print Jobs on
page 130.
Printing Confidential Documents in Unix
You cannot use the private print feature in combination with the proof
print in Unix applications.
1
To print a private document, enter the following command:
lp -0
private=< din> <filename>
where
din
is a five-digit (numeric)
value.
The document is spooled to the controller for printing.
2 From the control panel of the Imagistics digital copier, release the job
for printing. See Releasing Print Jobs on page 130.
Printing a Proof Copy from a Windows Workstation
The proof print feature prevents costly mistakes by allowing you to check
the printed output on a sample copy before printing an entire multi-copy
job. Then, depending on whether or not the proof meets your
expectations, you can cancel the job or print the remaining copies.
Using the proof print feature involves two steps:
„
Print the job to the copier in proof print mode. This step is platform-
specific.
„
Assuming the proof is satisfactory, release the job for printing from
the control panel of the copier.
Note: You cannot use the proof print feature in combination with the
private print feature.
1 On the Setup properties tab, select
Proof Print
from the
Job Type
drop-
down list.
2 Enter the total
Number of Copies
you want to print.
You can alter this number from the digital copier control panel after
you review the proof copy.