imagistics ipc1-im8130, Operator'S Manual

Page: 31 / 214

ipc1-im8130 Operator’s Guide 15
Client Setup
1 Insert the ipc1-im8130 Client CD-ROM into the workstation CD-ROM
drive. If
Auto-Run
is enabled, the InstallShield Setup Wizard starts
automatically.
Otherwise, choose
Run
from the Start menu and then locate the
Setup.exe
file on the CD-ROM. Click
OK
to launch the setup
program.
2 Follow the Setup Wizard through the installation steps. When
prompted:
„
Enter a destination directory or accept the default location.
„
Select the drivers and fonts to install.
„
Enter the network path to the printer or the queue name.
„
Select a program group or accept the default.
3 When the setup program finishes copying the necessary files to your
computer, it prompts you to view the Readme file and launch ipc1
Document Monitor. Deselect either or both options, if you want, then
click
Finish
to exit the Setup Wizard.
Note: Only the Windows 98/Me operating system automatically
creates the printer port. If you are using the Windows NT,
Windows 2000, or Windows XP operating systems, you must
manually create the printer port after installing the printer drivers.
Uninstalling Client Software
1 If open, close the ipc1 Document Monitor application.
2 Insert the ipc1-im8130 Client CD-ROM into the CD-ROM drive. If
Auto-Run
is enabled, the InstallShield Setup Wizard starts
automatically.
Otherwise, choose
Run
from the Start menu and then locate the
Setup.exe
file on the CD-ROM. Click
OK
to launch the setup
program.
The setup program automatically detects previously installed versions
and opens the Client Setup Maintenance Program.