manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 93

l

Bind optical cables with cable ties. Ensure that optical cables are routed straightly and
bound neatly and that cable ties are installed at even spacing and fastened properly.

Step 4

When you use an optical cable:

1.

Remove the old optical cable.
Remove the old optical cable from the server.

2.

Connect the new optical cable.

NOTE

l

Connect the new optical cable to the same port as the old one.

l

Connect the optical cable to the optical module securely.

1.

Insert the optical module into the optical port. See step (1) in 

Figure 3-17

.

Figure 3-17

 Connecting an optical cable

2.

Close the latch on the optical module to secure it. See step (2) in 

Figure 3-17

.

3.

Insert the optical cable into the optical module. See step (3) in 

Figure 3-17

.

Step 5

When you use an SFP+ cable:

1.

Remove the old SFP+ cable.
Gently push the power connector inwards and pull the latch out to remove the SFP+
cable. See 

Figure 3-18

.

Do not directly pull the latch out.

RH2288 V3 Server
User Guide

3 Installing and Removing the Server

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

81

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands