Huawei RH2288 V3 User Manual Download Page 154

Page: 154 / 315

Figure 7-14

Removing a PSU

Step 5

Remove the PSU from the slot. See step (2) in

Figure 7-14

----End

7.10 Installing a PSU

7.10.1 Installing an AC PSU

Install an AC PSU to replace the original one.

An AC PSU needs to be added to improve reliability when only one AC PSU is configured
for the RH2288 V3.

Procedure

Step 1

Wear an ESD wrist strap. For details, see

1 Safety Instructions

Step 2

Remove the PSU to be replaced. For details, see

7.9.1 Removing an AC PSU

Step 3

Take the spare AC PSU out of its ESD bag.

Step 4

Push the spare AC PSU along the guide rails into a slot until the PSU clicks into place.

The PSU latch snaps in so that the PSU does not move. See

Figure 7-15

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

142

Summary of Contents for RH2288 V3




























































































































































































































































































































Search results

Summary of Contents for RH2288 V3

Reviews:

Brands by name

Popular brands

Huawei RH2288 V3, User Manual

Search results

Summary of Contents for RH2288 V3

Reviews:

Brands by name

Popular brands