Huawei RH2288 V3, User Manual

Page: 28 / 315

PCI
e
Dev
ice CP
U PCIe
Stan
dard Connec
tor
Width Bus
Width Port
Nu
mbe
r Root
Port
(B/D/F
) Device
(B/D/F) Slot Size
Note 1: B/D/F stands for Bus/Device/Function Number.
Note 2:
Root Port (B/D/F) indicates the bus number of a CPU internal PCIe root port.
Device (B/D/F) indicates the bus number (displayed on the OS) of an onboard or external
PCIe port.
Note 3: The PCIe slots that support full-height full-length PCIe cards are backward
compatible with full-height half-length or half-height half-length PCIe cards.
Note 4: The PCIe slots with the bus width of PCIe x16 are backward compatible with PCIe
x8, PCIe x4, and PCIe x1 cards.
Note 5: All slots support PCIe cards of up to 75 W. The power of a PCIe card varies
depending on its model. Use the
Huawei Server Compatibility Checker to check
supported PCIe cards. For PCIe cards not listed in the Huawei Server Compatibility
Checker , contact your local Huawei sales personnel.
Note 6: This table lists the default values of B/D/F . If thePCIe sockets are not fully
populated or a PCIe card with a PCI bridge is configured, the values of B/D/F may differ.
Note 7: For a server with NVMe PCIe SSDs, a 2-slot riser module must be installed on the
I/O module and an NVMe PCIe SSD adapter can be installed only in slot 7.
PCIe GPU Configuration Guidelines
A GPU must be installed on a PCIe riser module.
l A 2-slot PCIe riser module supports one single-slot or dual-slot PCIe x16 GPU, which is
installed in slot 7.
l A 3-slot PCIe riser module does not support any GPU.
ESNs
An Equipment Serial Number (ESN) is a string that uniquely identifies a server. An ESN is
required when you apply for technical support from Huawei.
Figure 2-16 shows the ESN format by using the example 2102310QPD10F3001263.
Figure 2-16 ESN example
RH2288 V3 Server
User Guide
2 Overview
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 16