Huawei RH2288 V3 User Manual Download Page 179

Page: 179 / 315

Figure 7-43

Installing a PCIe card on the mainboard

Step 5

Close the latch. See step (2) in

Figure 7-43

Step 6

Install the chassis cover. For details, see

7.12 Installing the Chassis Cover

Step 7

Install the RH2288 V3. For details, see

3.4 Installing the Server

Step 8

Connect all external cables such as power and network cables. For details, see

3.5

Connecting External Cables

Step 9

Power on the RH2288 V3. For details, see

4.1 Powering On the Server

----End

7.23 Removing the DVD Drive

Remove the DVD drive before replacing it with a new one.

With Eight 2.5-inch Hard Disks

Step 1

Wear an ESD wrist strap. For details, see

1 Safety Instructions

Step 2

Determine the cabinet number and chassis number of the server to be removed, and label its
panel to prevent misoperations.

Step 3

Power off the RH2288 V3. For details, see

4.2 Powering Off the Server

Step 4

Remove all external cables such as power and network cables.

Step 5

Remove the RH2288 V3 and put it on an ESD desktop. For details, see

3.6 Removing the

Server

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

167

Summary of Contents for RH2288 V3




























































































































































































































































































































Search results

Summary of Contents for RH2288 V3

Reviews:

Brands by name

Popular brands

Huawei RH2288 V3, User Manual

Search results

Summary of Contents for RH2288 V3

Reviews:

Brands by name

Popular brands