manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 180

Step 6

Remove the chassis cover. For details, see 

7.11 Removing the Chassis Cover

.

Step 7

Remove the air duct. For details, see 

7.13 Removing the Air Duct

.

Step 8

Remove all fan modules. For details, see 

7.15 Removing a Fan Module

.

Step 9

Press and hold down the latches on both sides of a fan module bracket, and lift the bracket.
Use the same method to lift the other fan module bracket. See steps (1) and (2) in 

Figure

7-44

.

Figure 7-44

 Removing fan module brackets

Step 10

Remove all cables from the DVD drive. See step (1) in 

Figure 7-45

.

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

168

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands