manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 105

Figure 3-30

 Removing an adjustable guide rail

Step 7

Remove the other guide rail on the opposite side in the same way.

----End

3.6.3 Removing the Server and Holding Rails

Step 1

Wear an ESD wrist strap or ESD gloves. For details, see 

1 Safety Instructions

.

Step 2

Power off the server. For details, see 

4 Powering On and Off the Server

.

Step 3

Disconnect all power cables and signal cables from the server.

Step 4

Remove the server.

1.

Loosen the captive screws on the server panel using a screwdriver. See (1) in 

Figure

3-31

.

RH2288 V3 Server
User Guide

3 Installing and Removing the Server

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

93

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands