Huawei RH2288 V3 User Manual Download Page 142

Page: 142 / 315

System battery

USB device

DIMM

Hard disk backplane

Flexible NIC

SATADOM

SD card

VGA board

PSU backplane

Mounting ear

M.2 SATA SSD card

NOTE

The preceding parts are for reference only. Actual replaceable parts may differ.

7.2 Tool Preparations

Prepare the following tools before replacing components:

Finger cots

Protective gloves

Flat-head screwdriver

M3 Phillips screwdriver

ESD gloves or ESD wrist strap

Packaging materials, for example, an ESD bag

7.3 (Optional) Removing the Front Bezel

Remove the front bezel before removing front panel components (such as hard disks and the
DVD drive) or left and right mounting ears.

The front bezel is installed on the front panel and comes with a security lock to prevent
unauthorized operations on hard disks.

Procedure

Step 1

Wear an ESD wrist strap. For details, see

1 Safety Instructions

Step 2

Unlock the front bezel by turning the key clockwise, and remove the key for proper storage.
See

Figure 7-1

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

130

Summary of Contents for RH2288 V3




























































































































































































































































































































Search results

Summary of Contents for RH2288 V3

Reviews:

Brands by name

Popular brands

Huawei RH2288 V3, User Manual

Search results

Summary of Contents for RH2288 V3

Reviews:

Brands by name

Popular brands