manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 239

Figure 7-109

 Removing an SD card

Step 13

Remove the SD card. See step (2) in 

Figure 7-109

.

Step 14

Place the removed SD card in an ESD bag.

----End

7.48 Installing an SD Card

Install an SD card if an SD card has failed or needs to be replaced with a new model.

The server can be installed with one or two SD cards, which are monitored by the iBMC. If
the iBMC detects two SD cards when completing initialization, the iBMC automatically
configures the two SD cards as a RAID 1 array. You can view information about the SD cards
and RAID 1 array on the iBMC WebUI by choosing 

System Info

 > 

Other

. However, you

cannot modify the configuration.

The two SD cards in the RAID 1 array are mirrored with each other. If the SD card to be
installed contains data, data overwriting will occur. Therefore, before installing an SD card,
ensure that the SD card contains no data.

NOTE

After replacing the faulty SD card, wait for at least 60 minutes for the RAID 1 rebuild to complete.

Procedure

Step 1

Wear an ESD wrist strap. For details, see 

1 Safety Instructions

.

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

227

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands