manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 83

Figure 3-8

 Installing the RH2288 V3

3.

When the two mounting ears of the RH2288 V3 come into contact with the mounting
bars on the cabinet, tighten the captive screws on the mounting ears to secure the
RH2288 V3. See step (2) in 

Figure 3-8

.

Step 3

After the installation is complete, connect a network cable, a VGA cable, or USB devices as
required. Connect the power cables and power on the RH2288 V3.

----End

3.4.3 Installing the Server on Holding Rails

Holding rails apply to a cabinet with a distance of 610 mm to 914 mm (24.02 in. to 35.98 in.)
between the front and rear mounting bars.

When installing the RH2288 V3 on the holding rails, you can configure a cable management
arm (CMA) to arrange the external cables connected to the server.

Procedure

Step 1

Install the holding rails.

1.

Holding down the release latch at the front end of the holding rail, pull out the locking
plate by its hook. See steps (1) and (2) in 

Figure 3-9

.

RH2288 V3 Server
User Guide

3 Installing and Removing the Server

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

71

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands