manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 194

Figure 7-60

 Ports with rubber plugs

Step 5

Align the connector on the RAID controller card with the port on the mainboard, and insert
the RAID controller card slowly into the mainboard. See step (1) in 

Figure 7-61

.

Figure 7-61

 Installing a RAID controller card

Step 6

Tighten the screws on the RAID controller card. See step (2) in 

Figure 7-61

.

Step 7

Connect cables to the RAID controller card. For details, see 

2.7 Internal Cabling

.

Step 8

Install full-height full-length riser cards if they are required. For details, see 

7.20 Installing a

Riser Card

.

Step 9

Install the chassis cover. For details, see 

7.12 Installing the Chassis Cover

.

Step 10

Install the RH2288 V3. For details, see 

3.4 Installing the Server

.

Step 11

Connect all external cables such as power and network cables. For details, see 

3.5

Connecting External Cables

.

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

182

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands