manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 225

Step 23

Loosen the screw on the mainboard using a Phillips screwdriver. See step (1) in 

Figure 7-94

.

Figure 7-94

 Removing a mainboard

Step 24

Push the mainboard in the arrow direction until it does not move, and lift the mainboard out of
the RH2288 V3 by holding the handle. See step (2) in 

Figure 7-94

.

Do not hold any other protruding part of the mainboard to lift it. Otherwise, the components
on the mainboard may be damaged.

Step 25

Place the removed mainboard in an ESD bag.

Before putting the mainboard into an ESD bag, ensure that the vacant CPU sockets are
populated with protective covers. For details about how to install a CPU protective cover, see

7.37 Removing a CPU

.

----End

7.42 Installing the Mainboard

Install a mainboard to replace the faulty one.

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

213

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands