manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 118

Figure 5-4

 Querying the health status for the RH2288 V3

d.

Clear alarms. For details, see the 

Huawei Rack Server Alarm Handling (iBMC)

.

NOTE

If the query result in 

c

 indicates that no alarm is generated for the server, skip this step.

l

Check the RH2288 V3 using the iBMC CLI.

a.

Log in to the iBMC CLI.

i.

Set an IP address for the PC, and ensure that the IP address is on the same
network segment as the iBMC management network port.

ii.

Connect the PC to the RH2288 V3 iBMC management network port by using
a network cable.

iii. Run the Secure Shell (SSH) tool on the PC, and enter the IP address of the

iBMC management network port, user name, and password to log in.

NOTE

By default, SSH is used to log in to iBMC. If the SSH service is disabled, enable it by
choosing 

Config

 > 

Service Settings

 on the iBMC WebUI.

b.

View the RH2288 V3 version information.
Check that the RH2288 V3 versions meet site requirements.

Hi1710 / # ipmcget -d v 
 ------------------- iBMC INFO ------------------- 
 IPMC               CPU:           Hi1710 
 IPMI           Version:           2.0 
 CPLD           Version:           (U46)1.05 
 Active iBMC    Version:           (U25)1.26 
 Active iBMC      Built:           08:26:05 Dec 23 2014 
 Backup iBMC    Version:           1.26 
 SDK            Version:           1.47 
 SDK              Built:           08:28:02 Dec 19 2014 
 Active Uboot   Version:           1.1.29 (Oct 13 2014 - 15:23:00) 
 Backup Uboot   Version:           1.1.29 (Oct 13 2014 - 15:23:00) 
 ----------------- Product INFO ----------------- 
 Product             ID:           0x0001 
 Product           Name:           RH2288 
 Product        Version:           V3 
 BIOS           Version:           (U47)1.19 
 -------------- Mother Board INFO --------------- 
 Mainboard      BoardID:           0x000f 
 Mainboard          PCB:           .B 
 ------------------- lexible NIC INFO ------------------- 
 SM211          BoardID:           0x0017 
 SM211              PCB:           .A 

RH2288 V3 Server
User Guide

5 Configuring the RH2288 V3

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

106

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands