manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 136

Upgrade Package

Document

Download a driver or firmware upgrade
package of the required version. The
followings are upgrade package examples:

l

iBMC management software: 

RH2288

V3-iBMC-V191.zip

l

BIOS firmware: 

RH2288 V3-BIOS-

V169.zip

l

Driver: 

FusionServer iDriver-

Windows-Driver-V304.zip

l

RAID controller card firmware:

FusionServer-RAID card-FW-
V101.zip

l

Release Notes

l

Huawei Server Firmware Upgrade
Guide

l

FusionServer Tools V100R002 uMate
User Guide

l

Huawei Rack Server Upgrade Guide
(iBMC)

l

Driver Version Mapping

 

Upgrading Firmware or Management Software

Upgrade server firmware or management software using one of the following methods:

l

Upgrade iBMC using the iBMC WebUI.

a.

Obtain the upgrade package from 

http://e.huawei.com/en/

.

b.

Log in to the iBMC WebUI and choose 

System

 > 

Firmware Upgrade

.

The 

Firmware Upgrade

 page is displayed.

c.

In the 

Firmware Upgrade

 area, click 

Browse

. In the displayed dialog box, select

the local directory for storing the upgrade package 

image.hpm

.

d.

Click 

Open

.

The 

Firmware Upgrade

 page is displayed.

e.

Select 

Immediately restart automatically

.

f.

Click 

Start Update

.

g.

Click 

Yes

.

h.

After the OS is restarted, log in to the iBMC WebUI again.

i.

Repeat 

b

 to 

h

 to upgrade the originally active image of iBMC.

For details, see the 

Huawei Rack Server Upgrade Guide (iBMC)

.

l

Upgrade the BIOS using the iBMC WebUI.

a.

Obtain the upgrade package from 

http://e.huawei.com/en/

.

b.

Log in to the iBMC WebUI and choose 

System

 > 

Firmware Upgrade

.

The 

Firmware Upgrade

 page is displayed.

c.

In the 

Firmware Upgrade

 area, click 

Browse

. In the displayed dialog box, select

the local directory for storing the upgrade package 

biosimage.hpm

.

d.

Click 

Open

.

The 

Firmware Upgrade

 page is displayed.

e.

Select 

Immediately restart automatically

.

f.

Click 

Start Update

.

RH2288 V3 Server
User Guide

6 Software and Configuration Utility

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

124

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands