manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 89

Figure 3-14

 CMA cabling

Step 6

Power on the RH2288 V3.

----End

3.5 Connecting External Cables

This section describes how to connect cables to the server.

3.5.1 Connecting Cables to a Mouse, Keyboard, and VGA Port

After powering on the server, connect cables to a mouse, keyboard, and VGA port to set the
BIOS and RAID, and log in to the OS.

The front and rear panels of the server provide DB15 VGA ports but have no standard PS/2
port for a keyboard or mouse. You can connect a keyboard and mouse to the USB ports on the
front or rear panel based on site installation conditions. The following describes two
connection methods:

l

Connect a keyboard and mouse to the USB ports.

l

Connect a keyboard and mouse using a USB-to-PS/2 cable.

Procedure

Step 1

Connect the USB connector on the PS/2 cable to the USB port on the front or rear panel of the
server.

RH2288 V3 Server
User Guide

3 Installing and Removing the Server

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

77

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands