Huawei RH2288 V3 User Manual Download Page 274

Page: 274 / 315

Step 3

Power off the RH2288 V3. For details, see

4.2 Powering Off the Server

Step 4

Remove all external cables such as power and network cables.

Step 5

Remove the RH2288 V3 and put it on an ESD desktop. For details, see

3.6 Removing the

Server

Step 6

Remove the chassis cover. For details, see

7.11 Removing the Chassis Cover

Step 7

Remove the cables from the M.2 SSD riser card. For details, see

2.7.1 Internal Cabling for

an M.2 SSD Riser Card

Step 8

Remove the M.2 SSD riser card.

For details about how to remove an M.2 SSD riser card from the mainboard, see

7.21.2

Removing a PCIe Card from the Mainboard

For details about how to remove an M.2 SSD riser card from a riser card, see

7.21.1

Removing a PCIe Card from a Riser Card

Step 9

Loosen the screw on the M.2 SATA SSD card using an M3 Phillips screwdriver. See step (1)
in

Figure 7-148

Removing an M.2 SATA SSD card

Step 10

Lifting the M.2 SATA SSD card at a 20° to 30° angle upwards, pull it out of the slot. See step
(2) in

Figure 7-148

Step 11

Place the removed M.2 SATA SSD card in an ESD bag.

----End

7.64 Installing an M.2 SATA SSD Card

Install an M.2 SATA SSD card to replace the faulty one.

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

262

Summary of Contents for RH2288 V3




























































































































































































































































































































Search results

Summary of Contents for RH2288 V3

Reviews:

Brands by name

Popular brands

Huawei RH2288 V3, User Manual

Search results

Summary of Contents for RH2288 V3

Reviews:

Brands by name

Popular brands