manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 285

9.4 Logging In to the Server Using the Independent
Remote Console

The independent remote console (IRC) is a tool developed based on the Huawei server
management software iBMC. You can use this tool to remotely access and manage a server,
without worrying about browser and JRE compatibility.

Table 9-1

 lists the OS and iBMC versions supported by the IRC.

Table 9-1

 Compatibility list

Client OS

Client OS Version

Management Software

Windows

Windows 7 32-bit or 64-bit

iBMC 2.28 or later

Windows 8 32-bit or 64-bit

Windows 10 32-bit or 64-bit

Windows Server 2008 R2 32-bit or
64-bit

Windows Server 2012 64-bit

Ubuntu

Ubuntu 14.04 LTS

Ubuntu 16.04 LTS

macOS

OS X El Capitan

 

Logging In to the Server Using the IRC (Windows)

Step 1

Download the IRC package for windows 

kvm_client_windows.zip

 to the local PC and

decompress it.

The IRC package is available at 

Independent Remote Console

.

Step 2

Connect the local PC to the iBMC management network port of the server, and configure an
IP address for the client to enable communication between the client and the iBMC.

The IP address configured for the PC and the iBMC management network port IP address
must be in the same network segment.

Step 3

Double-click 

KVM.exe

.

A dialog box similar to the one shown in 

Figure 9-6

 is displayed.

RH2288 V3 Server
User Guide

9 Common Operations

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

273

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands