Huawei RH2288 V3 User Manual Download Page 206

Page: 206 / 315

Step 9

Connect all external cables such as power and network cables. For details, see

3.5

Connecting External Cables

Step 10

Power on the RH2288 V3. For details, see

4.1 Powering On the Server

----End

7.37 Removing a CPU

Remove a CPU if it has failed or needs to be replaced with a new model.

Only the personnel authorized by Huawei and Huawei technical support can remove a
CPU from a Huawei server.

Do not wear ESD gloves during CPU replacement. The gloves may catch on the pins on
the bottom of the CPU and damage it.

Procedure

Step 1

Wear an ESD wrist strap. For details, see

1 Safety Instructions

Step 2

Determine the cabinet number and chassis number of the server, and label its panel to prevent
misoperations.

Step 3

Power off the RH2288 V3. For details, see

4.2 Powering Off the Server

Step 4

Remove all external cables such as power and network cables.

Step 5

Remove the RH2288 V3 and put it on an ESD desktop. For details, see

3.6 Removing the

Server

Step 6

Remove the chassis cover. For details, see

7.11 Removing the Chassis Cover

Step 7

Remove full-height full-length riser cards if they are installed. For details, see

7.19 Removing

the Riser Card

Step 8

Remove the air duct. For details, see

7.13 Removing the Air Duct

Step 9

Determine the position of the CPU on the RH2288 V3. See

Figure 7-70

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

194

Summary of Contents for RH2288 V3




























































































































































































































































































































Search results

Summary of Contents for RH2288 V3

Reviews:

Brands by name

Popular brands

Huawei RH2288 V3, User Manual

Search results

Summary of Contents for RH2288 V3

Reviews:

Brands by name

Popular brands