manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 191

Procedure

Step 1

Wear an ESD wrist strap. For details, see 

1 Safety Instructions

.

Step 2

Remove the system battery to be replaced. For details, see 

7.27 Removing the System

Battery

.

Step 3

Take the spare system battery out of its ESD bag.

Step 4

Hold the system battery with the side marked with text facing upwards, insert the left end of
the system battery into the slot, and gently press down the system battery until it is properly
installed in the slot. See 

Figure 7-57

.

Figure 7-57

 Installing the system battery

Step 5

Install the chassis cover. For details, see 

7.12 Installing the Chassis Cover

.

Step 6

Install the RH2288 V3. For details, see 

3.4 Installing the Server

.

Step 7

Connect all external cables such as power and network cables. For details, see 

3.5

Connecting External Cables

.

Step 8

Power on the RH2288 V3. For details, see 

4.1 Powering On the Server

.

----End

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

179

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands