manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 144

----End

7.4 (Optional) Installing the Front Bezel

Install the front bezel after replacing front panel components (such as hard disks and the DVD
drive) or left and right mounting ears. The front bezel is optional and can be selected as
required.

The front bezel is installed on the front panel and comes with a security lock to prevent
unauthorized operations on hard disks.

Procedure

Step 1

Wear an ESD wrist strap. For details, see 

1 Safety Instructions

.

Step 2

Remove the key from the front bezel. See 

Figure 7-3

.

Figure 7-3

 Removing a key

Step 3

Unlock the front bezel by turning the key clockwise, and remove the key for proper storage.
See 

Figure 7-4

.

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

132

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands