manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 174

Step 9

Install the RH2288 V3. For details, see 

3.4 Installing the Server

.

Step 10

Connect all external cables such as power and network cables. For details, see 

3.5

Connecting External Cables

.

Step 11

Power on the RH2288 V3. For details, see 

4.1 Powering On the Server

.

----End

7.21 Removing a PCIe Card

A PCIe card can be installed on the mainboard or on a riser card. The following describes
how to remove a PCIe card from the mainboard or from a riser card.

7.21.1 Removing a PCIe Card from a Riser Card

Remove a PCIe card before replacing it with a new one or removing the riser card where it is
installed.

Procedure

Step 1

Wear an ESD wrist strap. For details, see 

1 Safety Instructions

.

Step 2

Determine the cabinet number and chassis number of the server to be removed, and label its
panel to prevent misoperations.

Step 3

Power off the RH2288 V3. For details, see 

4.2 Powering Off the Server

.

Step 4

Remove all external cables such as power and network cables.

Step 5

Remove the RH2288 V3 and put it on an ESD desktop. For details, see 

3.6 Removing the

Server

.

Step 6

Remove the chassis cover. For details, see 

7.11 Removing the Chassis Cover

.

Step 7

Remove all cables from the riser card if any.

Step 8

Remove a riser card tray. Lift the riser card tray. See 

Figure 7-38

.

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

162

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands