Huawei RH2288 V3 User Manual Download Page 190

Page: 190 / 315

Procedure

Step 1

Wear an ESD wrist strap. For details, see

Step 2

Determine the cabinet number and chassis number of the server to be removed, and label its
panel to prevent misoperations.

Step 3

Power off the RH2288 V3. For details, see

4.2 Powering Off the Server

Step 4

Remove all external cables such as power and network cables.

Step 5

Remove the RH2288 V3 and put it on an ESD desktop. For details, see

3.6 Removing the

Server

Step 6

Remove the chassis cover. For details, see

7.11 Removing the Chassis Cover

Step 7

Pull up the right end of the system battery and remove it from the slot. See

Figure 7-56

Removing the system battery

Step 8

Place the removed system battery in an ESD bag.

----End

7.28 Installing the System Battery

Install a system battery to replace the original one.

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

178

Summary of Contents for RH2288 V3




























































































































































































































































































































Search results

Summary of Contents for RH2288 V3

Reviews:

Brands by name

Popular brands

Huawei RH2288 V3, User Manual

Search results

Summary of Contents for RH2288 V3

Reviews:

Brands by name

Popular brands