manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 29

No.

Description

1

Indicates the ESN ID.

2

Indicates the material identification code
(eight characters).

3

Indicates the vendor code (two characters).

4

Indicates the year and month (two
characters).

5

Indicates the serial number (six characters).

 

2.3 Ports

Table 2-3

 and 

Table 2-4

 describe the external ports on the RH2288 V3.

Table 2-3

 Ports on the front panel

Port

Type

Quantity

Description

Video
graphics
array
(VGA)
port

DB15

1

The VGA port is used to connect a terminal,
such as a monitor or KVM.

USB port

USB 2.0

2

The USB ports are connected to USB devices.

NOTE

Before connecting to an external USB device, check
that the USB device operates properly. A server may
fail if it is connected to an abnormal USB device.

 

Table 2-4

 Ports on the rear panel

Port

Type

Quantity

Description

VGA port

DB15

1

The VGA port is used to connect a terminal,
such as a monitor or KVM.

USB port

USB 3.0

2

The USB ports are connected to USB devices.

NOTE

Before connecting to an external USB device, check
that the USB device operates properly. A server may
fail if it is connected to an abnormal USB device.
USB 3.0 is disabled by default. You can enable it on
the BIOS as required.

RH2288 V3 Server
User Guide

2 Overview

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

17

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands