manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 182

Step 8

Remove the air duct. For details, see 

7.13 Removing the Air Duct

.

Step 9

Remove all fan modules. For details, see 

7.15 Removing a Fan Module

.

Step 10

Press and hold down the latches on both sides of a fan module bracket, and lift the bracket.
Use the same method to lift the other fan module bracket. See steps (1) and (2) in 

Figure

7-46

.

Figure 7-46

 Removing fan module brackets

Step 11

Locate the cables connecting the mainboard and the front disk backplane to the DVD drive,
and disconnect the cables from the mainboard and the front disk backplane. For details, see

2.7 Internal Cabling

.

Step 12

Use a Phillips screwdriver to unscrew the DVD drive panel. See step (1) in 

Figure 7-47

.

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

170

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands