Huawei RH2288 V3 User Manual Download Page 195

Page: 195 / 315

Step 12

Power on the RH2288 V3. For details, see

Step 13

Log in to the RAID configuration screen to check whether RAID configuration needs to be
imported or activated. For details, see the

Huawei V2&V3 Server RAID Controller Card

User Guide

----End

7.31 Removing the PCIe Plug-in RAID Controller Card

Remove a PCIe plug-in RAID controller card before replacing it with a new one.

Procedure

Step 1

Wear an ESD wrist strap. For details, see

1 Safety Instructions

Step 2

Determine the cabinet number and chassis number of the server to be removed, and label its
panel to prevent misoperations.

Step 3

Power off the RH2288 V3. For details, see

4.2 Powering Off the Server

Step 4

Remove all external cables such as power and network cables.

Step 5

Remove the RH2288 V3 and put it on an ESD desktop. For details, see

3.6 Removing the

Server

Step 6

Remove the chassis cover. For details, see

7.11 Removing the Chassis Cover

Step 7

Remove the riser card if the RAID controller card to be removed is installed on a riser card.
For details, see

7.19 Removing the Riser Card

Step 8

Check the chip model of the RAID controller card to be removed.

If the chip model of the RAID controller card to be removed is LSI SAS3108, remove the
trans flash module (TFM) first. For details, see

7.34 Removing the Supercapacitor (PCIe

Plug-in RAID Controller Card)

If the chip model of the RAID controller card to be removed is PM8060, remove the cable
between the supercapacitor and the RAID controller card. For details, see

7.34 Removing the

Supercapacitor (PCIe Plug-in RAID Controller Card)

Step 9

Remove the SAS cables from the standard RAID controller card.

Step 10

Remove the standard RAID controller card.

For details about how to remove a standard RAID controller card from the mainboard,
see

7.21.2 Removing a PCIe Card from the Mainboard

For details about how to remove a standard RAID controller card from a riser card, see

7.21.1 Removing a PCIe Card from a Riser Card

Step 11

Place the removed standard RAID controller card in an ESD bag.

----End

7.32 Installing the PCIe Plug-in RAID Controller Card

Install a PCIe plug-in RAID controller card to replace the original one.

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

183

Summary of Contents for RH2288 V3




























































































































































































































































































































Search results

Summary of Contents for RH2288 V3

Reviews:

Brands by name

Popular brands

Huawei RH2288 V3, User Manual

Search results

Summary of Contents for RH2288 V3

Reviews:

Brands by name

Popular brands